News

  • 11082021
  • The characteristics and applications of drive in racks

    By ACEALLY
    3433

    Drive in racks can also be called drive through racks, which are typical continuous whole-building racks that do not require forklift aisles. Compared with ordinary storage racks, there is a very significant improvement in the utilization of warehouse storage space, and more storage racks can be built in the warehouse to store products without the passage of space.

    aceshelving20211108The-characteristics-and-applications-of-drive-in-racks

    The characteristics of drive-in racks are as follows:

    1. The storage mode adopted by the drive-in rack is “first in, last out”, but it can be used with special forklift equipment to store and store goods.

    2. Drive-in racks require a lower investment cost. Unlike ordinary racks, the structure of drive-in racks is simpler, so the cost of manufacturing racks is lower than that of ordinary racks.

    3. Drive-in racks are suitable for some products with relatively large horizontal sizes, few varieties and relatively large quantities, and the access mode can be determined according to the actual situation, usually used to store large quantities of the same type of products.

    The above three points are some of the characteristics of drive-in racks. Next, let us look at the specific applications of drive-in racks:

    The special structure of the drive-in rack makes the floor area of ​​this rack smaller, so its storage density will also increase. Compared with ordinary conventional shelves, because of the reduction of the channel space, the utilization rate of the warehouse space is higher. Drive-in racks are usually used with special forklifts, so the height of the racks does not have too many limitations, and can be designed according to the maximum height that the forklift can raise. Drive-in racks are often used in cold storage and other places where the cost of storage space is high.


    Post time: 11-08-2021