News

The tray of drive through pallet racking is not placed on the cross beam of shelf, the middle of storage space is through, and the tray is supported by the longitudinal corbel beams on both sides. The drive in pallet racking system is similar to the ground stacking, but the mode of the ground sta...

The pallet racking system of mezzanine floor shelving usually uses medium shelf or heavy duty shelf as the main support and floor steel gusset plate (which shelf is selected according to the total load weight of shelf unit). The cold-rolled section steel floor, checkered steel floor or wooden ply...

First, the drive in the form of shelves for storing goods and refrigerated products is very similar. Drive-in racking is more suitable for storage category less and a single type of more products into the warehouse storage. This is because of the structure of drive-in racking so that the goods pl...

Product features: The push back steel pallet rack, also known as the press-in shelf, is connected by a multi-layer trolley between the front and rear beams. The stacked goods are placed on the trolley from the outside, and the stored products will push the original products to go to inside. The p...

Medium duty longspan shelving is usually manual access to goods, packaged structure, the layer spacing is 50mm uniform adjustable, goods are often loose or not very heavy packed goods (easy to manual access), shelf height is usually below 2.5m, otherwise it is difficult to reach manually (such as...

The wire mesh storage cage has the advantages of fixed storage capacity, neat stacking, clear storage, easy inventory checking and so on, and also improves the effective utilization rate of storage space. In addition, the metal cage is strong and durable, easy to transport, can be reused, can eff...

A large amount of investment is put into the establishment of cold storage at one time, to ensure that the temperature inside the cold storage reaches the required state, especially in the early stage, when the overall temperature inside the cold storage is reduced to the constant temperature of ...

At present, the society pays attention to environmental protection, but environmental protection is not only reflected in paying attention to health, saving energy, recycling and other aspects, which also need attention. For example, all walks of life in the storage of goods, also began to implem...

The steel structure platform used in warehouse shelves is also called working platform. Modern steel structure platform has many forms and functions. The most important feature of the structure is the overall assembly structure, which is flexible in design and can be designed and manufactured acc...

Cantilevered tseel rack shelves are mainly composed of columns, cantilevered beams, octuples, connecting rods, etc., which are characterized by the light structure of the cantilevered forward, strong load-carrying capacity, and can greatly improve the application rate and working efficiency of th...

The press in shelf is mainly composed of column, beam, track and carrier car. The press in shelf is evolved from the pack back pallet racking. It adopts the principle that the track and pallet car are embedded with each other. The track has a certain slope (about 3 °), and the self weight of the ...

Now the storage cage is widely used in the logistics industry, you may be a little strange, Let’s introduce the production process of the Aceally storage cage for you, let’s have a look! 1、 Product overview Q195 high-speed wire is used as raw material for storage cage, which is cold ...

Aceally Steel Angle Shelving is one of the light duty shelving. The use of high cold rolled steel plate, stamping forming, easy to disassemble and adjust, flexible combination, strong transformation. It can placed in accordance with customer requirements to increase or decrease the number of laye...

1.Refer to the difference between three-dimensional warehouse and traditional warehouse is shown in these aspects: more complicated structure, greater flexibility, high staff requirements, and Greater flexibility, timely adjustment. 2.More complicated structure Build a three-dimensional warehouse...

Referring to galvanized finishing on wire mesh decking, it takes the low-carbon steel as the core, through the wire drawing, the electricity galvanization craft processing makes the metallic composite. It is cold galvanizing, also known as electro galvanizing, is the use of electrolytic equipment...

Warehouse wire mesh storage cage is an important logistics container in storage and transportation. The utility model has the advantages of fixed storage capacity, orderly stacking, clear storage, convenient inventory, etc., and improves the effective utilization rate of storage space at the same...

In the widely used folding steel storage cage, how much do you know about the storage cage? Which aspects will affect the quality of storage cage? In fact, in China, the production process and technology of most warehouses are the same, the shape is basically the same, only the galvanized part ou...

Why do more and more enterprises choose customized racking system instead of buying finished products? In fact, it has a lot to do with the quality of shelves. With the increase of the demand for the shelves, the quality requirements of the shelves in the warehouse become higher. Because the shel...